User Manual Guide for Wireless Repeater Setup Using myrepeater

 Myrepeater.net is a local web address which is used by several extenders to set up the wireless repeater. This web address helps in managing the wireless repeater and the configuration settings which include login, software settings, network and firmware updates. The repeaters are used to amp up the internet speed. Nowadays, repeaters are manufactured by using advanced technology with high power antennas and amplifiers. There are some users who are confused on how to set up the wireless repeater. If you are the one of them and looking for the simple instructions on how to set up the wireless repeater then don’t panic. Just scroll down till the end and check out the steps for wireless repeater setup using myrepeater. 

Quick Instructions for the Wireless Repeater Setup Using myrepeater

Before starting the wireless repeater setup, you need to plug your device into the power socket. Here is the simple guide to set up the wireless repeater by using myrepeater:

Step 1: The first step is to detach the old router from the modem and all the connected devices with your device such as the computer system.

Step 2: After that, connect your wireless router and modem using the Ethernet cable. Connect one end of the Ethernet cable to the modem and the other end of the Ethernet cable to the WAN port of the wireless router. 

Step 3: Turn off the modem and wireless router by detaching the power cords from them. Disable the power supply for about 10-15 seconds. 

Step 4: Next, plug them back to the power socket and then turn on the modem. Thereafter, you need to wait for sometime and then turn on the router as well.

Step 5: Now, take an Ethernet cable and use it to connect the router to the computer device. 

Step 6: Open any default web browser from your system. Enter myrepeater.net in the address bar of the web browser. 

Step 7: If you are not a new user then you will see that a login screen will display. 

Step 8: In case, you are a new user then a setup configuration screen will display.

Step 9: The Smart Setup wizard will display on the screen and it starts the setup process automatically. Press the Start Setup option. You will see that the setup wizard displays some instructions to do the internet connection settings of the wireless repeater. You need to follow the prompts.

Step 10: Tap on the Automatic Configuration option to allow the configuration settings automatically. Hit on the Next button to go ahead. 

Step 11: A new screen prompts asking you to enter a new SSID or network name of the wireless router. 

Step 12: Finally, your wireless repeater has been set up successfully.  Go ahead with the configuration settings. 

That’s it! With the above-mentioned instructions you will get to know how to set up the wireless repeater by using the myrepeater web address. If you are stuck with any issue during logging into the wireless repeater then there are some alternative ways through which you can set up your repeater. Our professional experts are always available for you to help in resolving the issue.