How Can You Modify Wifi Repeater Password Via https://Myrepeater.net?

 While you do your Repeater setup you need to login to http//myrepeater.net for hassle-free access to the login page of your wifi n wifi repeater. You can do basic configuration settings or advanced network or firmware settings by just signing into http//myrepeater.net and accessing the wifi repeater’s login web UI. The best part is that you can modify your wifi repeater’s password anytime if you feel there is a risk to its security. In this blog, we will explain how to log in to your wifi repeater using myrepeater.net and alter the username or password of your repeater. 

Set Up Your Wifi Repeater With The Help Of An Ethernet Cord:

1. Connect your wifi repeater to your PC device with the help of an Ethernet cord.

2. Open your default internet browser and in that type http//myrepeater.net and press enter to go ahead.

3. A dialog box will show up on your screen, enter the username and passkey correctly in the respective spaces.

4. If you don’t know the username and password, the ‘admin’ is the default credential for both fields.

5. Select from the AP mode or wifi repeater mode accordingly when shown.

6. Now, type in your network name or SSID and password that you want to set for your repeater device.

7. Hit the finish icon to apply all the settings that you modified.

8. Finally, connect all your wifi-compatible devices to the wifi repeater once again.

                                                              

Set Up Your Wifi Repeater With The Help Of A Wifi Protected Setup:

1. To start, first, link your wifi repeater to the electrical socket.

2. Search the WPS button on your wifi repeater and press it for nearly 8-10 seconds.

3. Then, on your home wifi router push the WPS button for almost 10 seconds.

4. The LED bulb on the repeater will become solid green indicating a successful connection between the wifi router and repeater.

5. Repeat the procedure in the case, only one wifi LED bulb is lit.

6. Then, hit the WPS button on both devices once again.

7. Finally, associate with your wifi repeater’s extended network by launching your web browser and searching myrepeater.net or 192.168.10.1 to open the wifi repeater’s login page.

8. On the next web page, enter ‘admin’ as your username and passphrase.

9. To complete the wifi repeater setup, you must follow all the on-screen instructions and guidelines.

Instructions To Modify The wifi n Wifi Repeater’s Username And Passkey:

• First, you have to switch on the wifi repeater.

• Now, connect your device to the wifi repeater’s signal. Its SSID might be a wifi repeater.

• Then, open the internet browser on your system and enter myrepeater.net in the address bar.

• To open the login page for your wifi repeater, enter ‘admin’ in both the username and password slots.

• Then, you have to select the mode in which you desire to set up your wifi repeater, i.e. access point mode or repeater mode.

• Now, give a new SSID to your wifi repeater and enter a secure password.

• Finally, hit the save tab to apply the new settings to your wifi repeater.

Password Modified!

That’s it! Now you have learned how to do the wifi repeater set up on myrepeater. To go to the settings, or modify the username or passkey of your wifi repeater log onto myrepeater.net with the correct login information. By following the above guidelines you can easily alter the wifi repeater’s settings. Make sure that you follow the guidelines as stated.